Mục lục
What Is Reactive Power Auto-Compensation Capacitor Controller？
Working Conditions of the Reactive Power Auto-Compensation Capacitor Controller
- Altitude Limit：The equipment shall be installed at an altitude below 1000 meters above sea level to avoid performance deviation caused by low air pressure.
- Ambient Temperature: Standard working ambient temperature ranges from -40℃ to +40℃ for stable long-term running.
- Installation Environment: Keep away from intense mechanical vibration, corrosive gas, harmful vapor and flammable & explosive dust.
- Rated Operating Voltage: Continuous working voltage is limited at rated voltage, long-term overvoltage shall not exceed specified upper limit.
- Overcurrent Control: Total operating current including harmonic components cannot surpass 1.3 times rated current value.
- Withstand Voltage Requirement: The device passes specified short-time withstand voltage test between terminals and shell as factory inspection standard.
Thông số kỹ thuật sản phẩm
| Tham số | Thông số kỹ thuật |
|---|---|
| Operating Power | AC 220V ±20% (50/60Hz) |
| Điện áp định mức | AC 380V/220V (Customizable) |
| Compensation Circuits | 6/8/10/12/14/16 outputs (Configurable) |
| Control Channels | 6/8/10/12/14/16 channels |
| Response Time | ≤20ms (Typical) |
| Sampling Burden | <0.05Ω (Current loop) |
| Dielectric Strength | ≥2500V AC (1min, input-output isolation) |
| Insulation Resistance | ≥100MΩ (500V DC) |
| Ambient Temperature | Operating: -25°C to +65°C |
| Storage: -40°C to +85°C | |
| Độ ẩm tương đối | ≤95% RH (Non-condensing) |
| Độ cao | ≤2500m ASL |
| Protection Rating | IP40 (Front panel) |
| IP20 (Terminal section) |
Why Choose ZHIMING's Reactive Power Auto-Compensation Capacitor Controller?
Intelligent Real-time Grid Monitoring
The reactive power auto-compensation capacitor controller continuously samples real-time voltage, current and power factor data of low-voltage three-phase grid. Based on collected operational parameters, this reactive power auto-compensation capacitor controller calculates required compensation capacity accurately to match varying load changes dynamically.
Automatic Capacitor Switching Control
Instead of manual on-off operation, the reactive power auto-compensation capacitor controller outputs automatic switching signals to accessorily matched compensation capacitors. It realizes graded input or cut of capacitance to lock system power factor within preset target range efficiently.
Multiple Built-in Safety Protection Functions
Equipped with overvoltage, undervoltage and overcurrent protection logic inside, the reactive power auto-compensation capacitor controller cuts off capacitor loops timely under abnormal grid conditions. This design avoids capacitor breakdown and extends the whole service life of matched compensation equipment.
Wide Compatibility With Various Capacitors
The reactive power auto-compensation capacitor controller supports collocation with standard dry-type, anti-harmonic low-voltage three-phase power capacitors. It fits most conventional reactive compensation cabinets used in industrial plants, commercial buildings and distribution stations.
Cost-saving & Long-term Economic Benefit
By stabilizing power factor and lowering reactive power waste, the reactive power auto-compensation capacitor controller helps users eliminate extra penalty charges from power supply bureau. Less circuit power loss also reduces monthly power consumption for long-running production workshops.
