Table des matières
What Is ZMTBB High Voltage Shunt Capacitor Compensating Switchgear?
Le condensateur de puissance shunt haute tension ZHIMING est un condensateur de puissance avancé et fiable conçu pour les applications industrielles et utilitaires. Conçu pour fonctionner efficacement dans les systèmes d'alimentation en courant alternatif de 50 ou 60 Hz, il joue un rôle crucial dans les réseaux de condensateurs de correction du facteur de puissance, contribuant à améliorer l'efficacité énergétique, à stabiliser les niveaux de tension et à réduire les pertes globales du système. En améliorant le facteur de puissance et en optimisant la gestion de la puissance réactive, ce condensateur permet non seulement d'augmenter la capacité de l'infrastructure électrique existante, mais aussi de prolonger la durée de vie des équipements connectés. Conforme à la norme internationale IEC 60871-1:2005, il s'agit d'un produit d'économie d'énergie reconnu au niveau national et adapté à un large éventail d'environnements à forte demande.
Working Conditions of the ZMTBB High Voltage Shunt Capacitor Compensating Switchgear
- Altitude of mounting site: not more than 1000m.
- Mounting size shall have no severe vibration, no corrosive gas and steam, no conductive and explosivedust Ambient temperature.
- Indoor use: 5℃ ~ 40℃; outdoor use 40℃~ 40℃.
Paramètres du produit
| Paramètres | Spécifications |
|---|---|
| Rated Operating Voltage | 1.1 Un continuous |
| Overload Capability | 1.3 In |
| Capacitor Deviation | 0% to +10% |
| Overvoltage Protection | ZnO arrester, coordinated insulation |
| Series Reactor | Dry‑type or oil‑immersed, reactance rate per design |
| Discharge Coil | Reduces terminal voltage to safe level after disconnection |
| Protection Methods | Fuse + opening delta overvoltage / voltage differential / neutral unbalanced current / overcurrent / quick‑break / overvoltage / undervoltage |
| Switching Control | Group switching controller, automatic or manual |
Modèle et implication
Main Technical Data of the ZMTBB High Voltage Shunt Capacitor Compensating Switchgear
Note : D'autres modèles de spécifications spéciales sont fournis en fonction des besoins de l'utilisateur.
Why Choose ZHIMING's ZMTBB High Voltage Shunt Capacitor Compensating Switchgear?
Multi-Layer Protection for Safe Operation
Each ZMTBB switchgear incorporates a comprehensive protection scheme: fuses at the capacitor unit level, ZnO arresters for overvoltage suppression, discharge coils for rapid de-energization after disconnection, and configurable relay protection — including opening delta overvoltage, voltage differential, neutral unbalanced current, overcurrent, quick-break, overvoltage, and undervoltage. This multi-layer approach isolates faults before they cascade, protecting both the capacitor bank and upstream equipment.
Four Structural Configurations for Any Site
The ZMTBB is available in frame type, split type, indoor panel type, and aggregate (oil-immersed) configurations. Frame and split types suit outdoor open-yard substations; indoor panel type integrates into existing switchgear lineups; aggregate type with oil-immersed capacitors provides additional environmental protection for harsh or humid locations. Each structure is engineered for its intended installation environment without compromising electrical performance.
Precision Capacitor Matching and Standards Compliance
Capacitor banks are assembled with individual units matched to within 10% capacitance deviation. The device complies with JB 7112-2000, DL/T 628-1997, and GB 50277-1995 standards, covering design, testing, and installation of shunt capacitor equipment. Series reactors — available as dry-type or oil-immersed — are precisely tuned to the required reactance rate, preventing harmonic resonance while enabling safe reactive compensation.
Intelligent Group Switching and Low Maintenance
The integrated group switching controller enables automatic or manual capacitor bank switching based on real-time power factor and voltage measurements. Step-by-step switching variants (TBBF prefix) provide finer reactive power adjustment for loads with fluctuating demand. The modular busbar-based assembly simplifies on-site installation, and the standardized capacitor unit design (BFM series) ensures easy spare parts availability and reduced long-term maintenance costs.
FAQ
What is the ZMTBB High Voltage Shunt Capacitor Compensating Switchgear used for?
The ZMTBB is designed for 6–10KV three-phase power systems to regulate grid voltage and improve power factor through automatic or manual switching of shunt capacitor banks. It is deployed in industrial substations, utility distribution networks, and facilities with large inductive motor loads that require reactive power compensation.
What protection methods does the ZMTBB switchgear provide?
The ZMTBB integrates a multi-layer protection scheme: fuses for individual capacitor units, ZnO arresters for overvoltage suppression, discharge coils for safe de-energization, and relay protection configurable as opening delta overvoltage, voltage differential, neutral unbalanced current, overcurrent, quick-break, overvoltage, or undervoltage — selectable based on the system’s neutral grounding scheme.
What structural configurations are available for the ZMTBB?
Four configurations are offered: frame type (open-frame for outdoor yards), split type (separated sections for transport flexibility), indoor panel type (integrates into indoor switchgear lineups), and aggregate type (oil-immersed capacitors for harsh or humid environments). The appropriate type is selected based on site layout, environmental conditions, and installation preferences.
What standards does the ZMTBB comply with?
The ZMTBB High Voltage Shunt Capacitor Compensating Switchgear is designed and tested in accordance with JB 7112-2000, DL/T 628-1997, and GB 50277-1995, covering the design requirements, technical ordering conditions, and installation codes for high-voltage shunt capacitor equipment.
Can the ZMTBB be configured for step-by-step switching?
Yes. The ZMTBB supports both normal (single-step) and step-by-step switching (designated by the “F” prefix in the model, e.g., TBBF). The integrated group switching controller allows automatic capacitor bank switching based on real-time power factor and voltage measurements, providing finer reactive power adjustment for loads with time-varying demand profiles.
